Excavation:
In this method, the contractor digs around the outside of your foundation all the way down to the footing using a backhoe. After the wall is completely exposed, he will check the original footer tiles or replace them and seal the wall with tar and plastic or some other waterproofing material. Then, gravel is put over the pipe, and the dirt is put back into the hole.

Inside Drains:
Inside drains may be used to waterproof from the inside of the basement. Typically, the floor is opened around the perimeter of the basement, a trench dug, and then pipe and gravel installed around the footer. The contractor also installs 'weepholes', small, one-half to three-quarter inch holes in each block cavity, to release the water that may be trapped. Then, holes are covered with a plastic molding or styrene panel before the floor is re-concreted.

Interior and Exterior Systems:
Waterproofing can be done combining the use of excavation and inside drains.Ask us about our patented MultiStep™ system to handle both hydrostatic pressure problems and walls leaking from cracks, holes in the wall, or deteriorated parging.

Stabl-Wall is the only product on the market that offers a permanent solution for repairing a home's aging foundation. This method and product is used to reinforce your foundation. It is as thin as a dime and stronger than steel.